The Commercial Building Improvements You Can’t Afford to Miss

Contractor Completing Building Improvements

What Qualifies as Building Improvements?

Building improvements are defined as capital events that substantially extend the life of a building. These improvements may also increase the value of the building and are recorded as an addition of value to the existing building. This occurs if the expenditure meets the capitalization threshold. Simply put, a building improvement is an investment in the building that increases its value or extends its useful life. While building improvements can radically change the functionality or value of a property, a leasehold improvement is an investment in a property that is undertaken to profit a tenant. Examples of building improvements include installing a new roof, renovating a kitchen or common lobby, or improving the existing pipelines underneath a building.

Energy Audits and Improvements for Commercial Buildings

Improvement for commercial buildings and energy efficiency are tied, hand-in-hand. A commercial energy audit identifies the places where buildings are using or losing significant energy. The best improvements to commercial buildings are the ones that are both cost-effective and beneficial for the long-term. One of the improvements that building owners may overlook is upgrading their plumbing. Plumbing tunneling should be considered if the pipes beneath the building are experiencing clogs or plumbing problems. Please consult the following list to preview a few simple ways to improve a commercial building.

  • Improve lighting. According to a leading study, installing better light fixtures in more areas is one of the most cost-effective and dramatic ways to enhance a space.
  • Replace doors. The doors of a building can add a uniquely appealing dimension to space. This approach is usually applied to multi-family buildings, but can also be used to great effect in upscale office buildings.
  • Updating appliances. One of the ways to both produce a positive improvement and increase the energy efficiency of a building is to update the appliances. Stainless steel refrigerators, microwaves, and dishwashers are considered more alluring than dated counterparts.
  • Roof coating. Responsibly applied roof coatings are one of the affordable ways for improvements to be made.

Leasehold Improvements Examples

Leasehold improvements are generally understood to be an improvement that is made to a leased building for the express purpose of benefitting the tenant. Leasehold improvements are commonly used in commercial real estate to retain a particular tenant or to appeal to a certain type of business. An example of a leasehold improvement is an architectural modification or replacement of a permanent fixture in the tenant’s space. Changes made to the ceilings, or updating the flooring and walls can be considered leasehold improvements. If an alteration is made for the benefit of multiple tenants in the building it is not a leasehold improvement.

Who Pays for Commercial Tenant Improvements?

Modifications or additions to commercial property to make it suitable for a tenant are a natural part of the leasing process. There are four ways that a landlord can go about paying for commercial leasehold improvements. The first way is a tenant improvement allowance. In this scenario, the landlord gives the tenant a specified allowance for the work needed. Another way is through rent discounts. This route is fairly straightforward, and utilizes free rent, or a rent discount, to the tenant, who will oversee the improvements. In the building standard allowance, or “build out” process, the landlord offers a package of improvements for every tenant. Each improvement not included in the standard build-out must be paid for by the tenant. Finally, the turn key is the final way to pay for improvements. The tenant must submit a design plan to the landlord, showing the improvements and cost estimates. In this scenario, the landlord pays for and oversees all the work.

Types of Leasehold Improvements

There are many different types of leasehold improvements. It is important to remember that particular leasehold improvements will have a wide range depending on who the tenant is. For example, a normal leasehold improvement in a retail space would be to partition a large, open space into smaller, more streamlined areas. This specifically designed space could be used for purposes such as for dressing rooms or cashier counters. Perhaps the installation of retail shelving is part of the equation. Replacing an old parquet floor with marble or tile is an example of a leasehold improvement. As long as the tenant and landlord equitably agree to terms that are firmly defined, the leasehold improvements are endless.

Commercial Building Depreciation

Owners of commercial real estate may not realize the full potential of tax deductions through depreciation. If you are an owner of a piece of commercial real estate, you can reduce your tax bill by depreciating the value of the property over a specific period of time. The internal revenue service depreciates residential rental buildings over 27.5 years. For retail and other commercial structures, the number is 39. What does this mean? It means that every year that a property owner owns a commercial or residential rental property, they deduct the depreciation from their income tax.

Do Building Improvements Qualify for Bonus Depreciation?

In the last several years, there have been some changes in the tax laws. With the Tax Cuts and Jobs Act (TCJA), bonus depreciation under Sec. 168(k) was dramatically modified to allow businesses to deduct 100% of the cost of the acceptable property when placed in service. It is subject to annual 20% phasedowns beginning in the year 2023. Congress may change this in the future, however at the time this article was written, this is the current law of the land.

What is the Difference Between Leasehold Improvements and Building Improvements?

There are some basic differences between leasehold improvements and building improvements. Leasehold improvements are all conducted within the parameters of the tenant’s space. They are designed to benefit the tenant. Building improvements occur outside of the tenant’s space – not exclusively, but with the provision that they are not for the sole benefit of the tenant. For example, if three kitchens on a floor are renovated for the benefit of different tenants, that would be considered a building improvement.

Building Improvements for Commercial Property

Building Improvements Depreciation

The internal revenue service requires commercial property owners to depreciate a building improvement over the same time frame that a building is depreciated. Usually, commercial real estate buildings have a 39-year-life, so it can take some measure of time to earn back the original investment. If it is at all possible to classify an improvement as a repair or as a leasehold improvement, more tax savings can be established sooner.

Your building improvements must be handled with professionalism. Our staff at Foam Tech are ready to assist. Please call us at 214.205.1200. Discover more about how building improvements in Dallas, TX can increase the value of your property.

What Is SPF roofing?

A Close Up Picture of a Technician Spraying Foam.

Spray Foam for Roofing

When it comes to our roofing systems, we want to ensure our roofing is long-lasting, durable, energy-efficient, and so much more. SPF roofing is able to offer that and so much more. While this roofing system is pretty common, a lot of people still don’t know what SPR roofing is. So, what is foam roofing? SPF, or foam and spray polyurethane foam roofing, is a roof that is made of a two-compound liquid, isocyanate and polyol, that is sprayed on as a liquid but starts to form as foam as it dries. After the foam dries, it needs to be sealed with a roofing coating in order to prevent water leaks and other damages. Just like you wouldn’t call someone who doesn’t know how to perform air conditioning installation, you wouldn’t call someone who couldn’t spray on SPF roofing. If you want this type of roofing, you will need to call a licensed and experienced roofer.

SPF Roofing Pros and Cons

There are a ton of roofing materials on the market; because of the wide selection, it can be hard to find the right roofing system for you. Fortunately, SPF roofing is one of those materials that work for different types of roofing, commercial or residential. As a property owner, it is important to know what the benefits of roofing material is, as well as the drawbacks. This will help you make a more educated decision when it comes time to invest in a new roofing material. Below are the benefits and issues of SPF roofing.

Spray Foam Roofing Benefits

Many people ask, “Is spray foam roofing good?” and the answer is yes! When it comes to SPF Roofing, there are several benefits that any commercial or residential property owner will love. Here is a list of the SPF roofing benefits.

  • Energy-Efficient: Spray foam roofing is very energy-efficient because it not only creates a barrier against UV rays, but it also acts as a barrier against water and air leaks.
  • Simple Installation: Installing SPF roofing is extremely easy. All the roofer has to do is spray the liquid onto the roof and wait for it to cure. Because it’s fast, it will also save you money.
  • Eco-Friendly: With this type of roofing, there is no need to tear off your current roof, as the spray foam can be sprayed directly onto the roof. Not only that, they have little to none VOCs, CFCs, and GWP.
  • Seamless Roof: The great thing about spray foam roofing is that is can form to any corner, joint, or shape, making it seamless. This not only prevents water from entering your property, but it can prevent water ponding, as well.

SPF Roofing Problems

There is so much to love about SPF roofing, but its important to be aware that they also have their downsides. These are some of the problems that property owners need to be aware of if they are considering a spray foam roof.

  • Incorrect Installation: As stated before, installing SPF roofing is easy, but it does require the skill set of an experienced roofer. If a roofing contractor has never installed SPF roofing, it can reduce the lifespan of the roof.
  • Inaccurate Spraying: This is in the same vein as incorrect installation, but if a roofer oversprays, they can get the spray foam on the building, windows, and even cars.
  • Frequent Maintenance: In order to benefit from this roofing material, you will need to have the spray foam maintained at least twice a year. This is to ensure there are no cracks or punctures in the material.
  • Precision Required: Not any roofer can just come and repair your SPF roof–it will need to be repaired by a roofer who has the precision and knowledge to repair this type of material.

How Long Does Spray Foam Roofing Last?

A Picture of a Technician Spraying Foam.

How Long Does Spray Foam Take To Cure?

If you get SPF roofing installed by a professional roofing contractor who knows how to accurately install a spray foam roof, then this type of roofing can last anywhere from 20 to 30 years. The great thing about this roof, other than it being so long-lasting, is that is doesn’t take that long to cure. The curing process can take 8 to 24 hours, but again, that is also dependent on whether the installation is done correctly. Many people who are interested in this roof ask, “Is spray polyurethane foam waterproof?” and the answer is yes and no. SPF roofing becomes waterproofed when a roof coating is installed on top of the spray foam. When the spray foam dries, the foam is porous, which means that there are holes and spaces in the material that can allow water in very easily. In order to waterproof SPF roofing, you need a great roofing coating to be coated on top of the spray foam. After the coating is applied, the SPF roof is completely waterproof. If you are interested in SPF roofing for your Dallas, TX property, call Foam Tech at 214.205.1200! We are the company you can go to for high-quality and professional spray foam roofing in the area. Get in touch with us today to learn more!

What Does Roof Coating Do?

Flat, grey roof

Does Roof Coating Stop Leaks?

Flat roofs are exceptionally popular for commercial properties for a range of reasons. These roofs require vigilant maintenance, and one of the forms of this maintenance is through a layer of roof coating. Roof coating extends the life of these roofs, prolonging the security of the original installation. Roof coating reduces heat transfer into the building, decreasing thermal shock (thermal expansion and contraction of the roof membrane), and helps to mitigate leaks. Most flat roofs are not perfectly sloped, thus great attention and care must be taken to select a quality roof coating for maximum rain insurance.

How Much Does Roof Coating Cost?

Roof coating can cost around $1,000 to $2,500 for professional application/installation. One gallon of roof coating costs around $15 to $30 dollars per gallon, with one gallon covering one hundred to one hundred and fifty square feet. Every roof is different, and depending on the area of the country you are in, the roofing type, type of sealant product used, and the complexity of the application, the price will vary.

How Do You Apply Roof Coating?

Laying down a professional coat of cool roof coating is ostensibly a job best left to the professionals, but if you are an aggressive DIY homeowner, applying elastomeric cool roof coatings can be accomplished. Competent results require great attention to detail, care, and a few special tools. Don’t forget to budget for an adequate amount of time to administer and apply the product properly. Product warranties may be limited or voided if improper application is utilized.

Inspect the roof membrane for cracks, tears, blisters, evidence of ponding, and more, If the roof is already coated, evaluate the condition of the coating. Pay attention to areas around roof penetrations, such as areas with vents or skylights. If the scope of the roof is in poor condition, do not attempt a roof coating.

If the roof is in good condition, purchase the necessary materials. A roof coating can be completed over a two-day weekend in warm weather. Dry, sunny weather over seventy degrees is ideal. You will need to prep the roof beforehand with a vigorous cleaning, and then repair and seal all roof penetrations. Consult your local hardware store with the measurements for your roof to receive appropriate amounts of materials, and advice.

Worker covered surface, bitumen primer for improving adhesion during surfacing, rolled waterproofing, during the installation of isolation on industrial or household objects

How Much Roof Coating Do I Need?

Before you venture to the store to purchase roof coating, you will need to procure a ladder and start doing some measurements for your roof. Knowing the square footage of your roof will help, and it will help you know how many pails of elastomeric roof coating you need. Measure the length and width of your roof to determine the size in square feet. The formula is: length x width = square feet. Essentially, every square one hundred feet will equal one gallon of coating.

How Much Does it Cost to Recoat a Foam Roof?

Usually, you will want to recoat your roof approximately five years after the first installation. At five years, the roof will still look like new, but in order to maximize your ultimate maintenance goals, you will want to meet this deadline. A coating upgrade usually costs about a quarter of the original roof cost. The recoat cost goes up incrementally with time for those who wait longer than five years to recoat. That means if new residential construction has occurred in your area, expect roofers to arrive in your area for flat roof maintenance.

Roof Coating to Stop Leaks

If you do happen to notice that your asphalt roof is experiencing a leak, using a roofing sealant is a short term fix. Over the long term, you are going to want to use a more permanent solution, such as a roofing repair. In the meantime, using a roofing coating is a possible solution. Once you identify the source of the leak, the roof coating you select will have to be specific. The factors depend on the material of your roof, the flashing, and the projected area for repair.

Roof Coating and Sealer

Roof coating acts as a type of sealer. There are four main types of roof coating: acrylic, asphalt, polyurethane, and silicone. The type of roofing sealant you ultimately settle for will match the purpose. If you are looking to seal exterior siding, windows, and doors, you will want exterior caulk, which is usually made of polyurethane. For matching the texture of materials like stucco or rough-sawn wood, textured caulk is a good choice. For interior painting projects, you’re looking for a latex caulk. If you have cracks in your concrete, you will want to settle for a caulk that has eminent flexibility, so polyurethane, acrylic latex, or a hybrid of the two will do.

Roof Coating vs. Replacement

One of the reasons why many building owners select a silicone coating to their roof is the fact that it accomplishes many of the goals of roof replacement for approximately half the cost. It is common for a building owner to refrain from full roof replacement in lieu of repairs. This is a poor alternative and does not fix the problem. By contrast, installing a silicone roof coating can take your current roof, which is failing, and turn it into one of the highest performing roofs available. This process can extend the life of the roof up to twenty years.

Roof Coating Benefits

In conclusion, there are many roof coating benefits that commercial and residential customers should consider:

  • Inexpensive to install.
  • Once properly installed, extend the life of your current roof.
  • Can be installed without disrupting everyday operations.

Customers in the Dallas, TX area, consult the professionals Foam Tech for your roof coating needs. Call: 214.205.1200.

Where to Start When Your Home has Water Damage

Water damage can occur in a home from lots of things. An overflowing tub, a clogged toilet, a busted pipe, a DIY plumbing job gone wrong, a failing water heater… the list goes on and on! Whatever the reason, if your home has flooded and you are facing water damage, you need to act fast to begin the drying process to save as much of your property as you can and to prevent mold growth. Water gets soaked into your flooring and walls, especially into things like fabric, wood, and insulation which is where mold is most often found. If you are needing new foam insulation as a result of water damage in Lubbock and Dallas, TX, call Foam Tech at 806.441.4636 or 214.205.1200 today.

Water Damage Restoration Steps

sandbags absorbing flooded water on floor

If Your Home Has Water Damage, Your Foam Insulation Can Get Mold If Not Properly Dried Out

  • Disconnect any electrical connections and move furniture out of the way. Water and electricity don’t mix and can lead to deadly outcomes when crossed. Prevent any more damage from happening by turning off the home’s power first before you unplug any electrical appliances. You can then move all furniture out of the way. There is a slim possibility that you could save your carpet if you pull up the entire thing including the underpadding, but since the carpeting will absorb the most water, it is better to just get new flooring.
  • Get rid of water by mopping or soaking it up. More water damage is going to occur if you leave the water just sitting there and letting it soak into your flooring, walls, and fabrics. The best way to get rid of water damage from your home is to try to mop it up or soak it up by using towels and buckets. You can properly dispose of the water by dumping it down your drain or pouring it onto your lawn. Only vacuum your carpeting to steam out the water if you are positive that no electricity will touch water; otherwise shocks and fires could occur. If lower levels of your home like a basement are completely flooded, sump pumps helps to suck up and drain the water.
  • Dry out all affected areas. After all the visible water has been removed, water that has been soaked up in the walls and flooring must next be aired and dried out to prevent mold growth. To do this, ventilation and large fans are key. You can rent specialised water restoration equipment like fans and humidifiers that are stronger than their everyday counterparts and are designed specifically for removing water damage.
  • Disinfect the areas to prevent mold growth. Mold likes to grow in dark and wet places, which is why this fungi spreads so quickly around homes that have water damage. You can apply mold control products that are applied over areas that have seen water damage and basically help to form a thin layer over the fungi to not only dry it out and suffocate it, but to also crush the roots of the spores. After that you can disinfect all areas to verify that there is no more mold and to also make sure that your home is clean of any other bacteria like sewage that might of gotten mixed in with the other water damage when your home flooded.
  • Properly dispose of all water damaged items. Some of the products used cannot be thrown away in a dumpster, and also shouldn’t in order to help cut down on landfill waste. If any electronics were permanently destroyed from the water damage or you are throwing away the strong chemicals used to kill the mold, these need to be turned in to certain recycling centers to be disposed of properly and responsibly.

Can Water Damage Dry Out?

What happens when drywall gets wet? When drywall gets wet, it becomes soft. When it becomes too soft, it will crumble and rot. While drywall is very sturdy when dry, its structural integrity gets compromised and becomes severely weakened. A lot of drywall have insulation inside of them, often either spray foam insulation in TX or fiberglass. The insulation especially will absorb the moisture and result in mold growth. Water damage can dry out when proper methods are used. These include using dehumidifiers, fans, and desiccants like calcium oxide that all absorb moisture.

How Much Does it Cost For Water Damage Restoration?

If your home was severely damaged by flooding or mold, you can expect upwards of $7,500 for home water damage cleanup services. The average cost for flood restoration is around $2,700. A lot of people ask ‘will home insurance cover water damage?’ Most of the time, your insurance company will, but it is always better to be safe and get a home water damage claim just in case they decide to deny you coverage. Some insurance companies might try and blame the water damage on negligence on the homeowners’ part, by saying that the water pipes burst due to age or poor maintenance. Be prepared for these scenarios just in case they should come up. If your foam walls received water damage in Lubbock and Dallas, TX and you are needing repairs, call Foam Tech at 806.441.4636 and 214.205.1200 today.

Have a More Energy Efficient Home This Winter

Child Looks Out Onto Snow Yard

Wanting to Keep Your Family Warm and Save Energy? Here’s How to Start!

The winter season demands much of your home, which is why it’s one of the most energy intensive times of every year. According to local studies, Texans pay an average of $1500 each year on electricity. Of course, this doesn’t factor in the cost of natural gas or propane use, which only adds to total expenditures. With this sizable annual costs, it’s no wonder that Texas homeowners are constantly asking how to improve home energy efficiency.

In today’s discussion, we’ll walk through ways many properties waste money each year, examine spray foam insulation, then discover some valuable energy saving tips. Here we go!

How Can I Make My Home More Energy Efficient in the Winter?

First off, you need to identify the cost-driving factors inside your home. In other words, which appliances and home features consume the most energy? You should know that your heating and cooling systems alone represent almost 50% of your home’s energy usage. That means that any improvements the family makes for these appliances will have large financial benefits. While your central heating will obviously be handling most of the air conditioning work this season, it’s easy to enhance your HVAC system’s overall efficiency for year-long savings. We’ll discuss specifics in a little while.

Two other key aspects to your home’s energy efficiency are your water heater and lighting. These two systems are almost always running, meaning they’re constantly drawing energy. If you improve energy efficiency in these two aspects of your home, the payoff will be instantaneous and long-lasting.

How to Conserve Heat in Your Home

White Electric Space Heater

Closing Vents in Unused Rooms and Plugging in Space Heaters are Easy Ways to Save.

It goes without saying, but a damaged heating system cannot function at peak efficiency. If your home requires gas or electric heating repair, it’s worth making the call to your local HVAC specialist. Assuming your central heating system is working properly, your next step should be to complete any outstanding maintenance on the heater. That means cleaning or replacing air filters, sealing leaky ducts, and checking the thermostat for glitches.

Remember this: any aspect of your home that forces your heating to work harder will both increase your energy usage and shorten the life of your HVAC hardware.

Of course, there are other ways to save heat energy in your home. Installing improved insulation in the attic and walls can dramatically cut your annual energy costs. Spray foam wall insulation provides much better coverage than most other products on the residential market. Now many homeowners ask us, “Is foam insulation flammable?” Like other forms of insulation, foam may catch fire, so your insulation installation should include a thermal or ignition barrier.

More Energy Saving Tips

There are a variety of projects, with a wide range of investment costs, that homeowners may complete to improve energy efficiency in their home. Spray foam insulation is just one project with a high ROI, but there are many others with similar benefits. Another way homeowners can enjoy fast electricity savings is replacing any old light bulbs with newer LEDs. LED lighting is notably more efficient and can offer hundreds of dollars in savings within just a few years.

Earlier, we also briefly mentioned water heaters as being a crucial part of your home’s energy usage. While the initial investment might be higher, tankless water heaters provide significant cost savings on a daily basis. Because tank storage models must consume gas, propane, or electricity to keep the stored water hot, it’s essentially running non-stop, 24/7. Tankless water heaters, on the other hand, produce hot water on demand and so avoid this “always-on” cost.

Changing Your Family’s Usage Pattern

Evolution of Energy Efficient Lighting

Updating Your Lighting is One of the Easiest Ways to Earn Consistent Savings.

One of the greatest sources of waste in American homes comes with heating the home while no one’s there. This is often the case with two income homes, where the entire family is engaged at work or school throughout the day. By turning your system off or programming the thermostat to schedule down times during work hours, your family could realize hundreds of dollars in savings and significantly longer lifetimes for your heating and cooling appliances.

Of course, there are simple ways to improve energy efficiency without making significant changes to your home! One of the easiest ways conserve heat in your home is bundling up and turning down the central heating. You can close vents in unoccupied rooms, and even install swivel heaters in the family living room. With a little planning, you might turn the experience into a fun family movie night routine. 

Schedule Your Efficiency Assessment!

There are countless ways to improve energy efficiency in your home, but sometimes it takes a trained eye to spot areas of waste. Our team at Foam Tech specializes in foam roofing, as well as attic and wall insulation. If you’d like to learn more about foam insulation in Texas, or if you’d like to get an estimate for your home, be sure to give our Lubbock office a call at 806.441.4636. For homeowners in the Dallas / Fort Worth area, you can reach our local team at 214.205.1200!

Bang from Your Buck: Home Renovation Projects With High ROI

A Couple Sits Together Planning a Home Renovation Project

Many Projects With High ROI Focus on Efficiency and Functionality, Rather Than Style.

There are two types of home renovation projects: value-generating and money-pits. While there are countless opportunities for beautifying and enhancing your property, not all them result in you getting your money back. Whether you desire to improve your home for yourself or for future buyers, why not start with projects that will help you get the greatest bang for your buck?

General Tips for Your Renovations

When it comes to increasing the value of your property, remember that not everyone has the same awesome style tastes you have. If you’re planning on selling the property, you’ll want to make sure your decor appeals to a general audience, or at least allows them to picture their own ideal styles. That doesn’t mean you can’t have fun with your projects, just don’t turn your home into a pink Barbie Dream House.

If you’re looking for easy ROI projects, focus on those that promote better energy efficiency, functionality, and relaxation. You don’t even have to begin with large construction projects. Try starting small! You’d be amazed by the minor details that can seal the deal!

Home Improvements With the Best ROI

When people generally consider home renovations, they often think of larger projects like:

  • Garage Expansion
  • Attic Bedroom Conversion
  • Open Concept Restyling 
  • General Modernization

Can you guess which home renovation project has the highest return on investment? None of the above! Installing improved insulation in your attic and walls actually provides better value for your investment than almost any other project. While efficiency improvements generally come with an impressive return, homeowners can actually recap their entire investment (and then some) by installing high R-factor attic insulation.

Lighting has a large effect on the evaluation and feel of a house. That means picking lighter interior paint colors and potentially updating windows. If you’re looking to immediately resell, don’t dive into the highest tier of premium windows. A simple wood or vinyl material will do.

When it comes to improved functionality, there are few projects as important as updating or repairing your plumbing. Nothing kills a sale like leaky pipes or mold growth. If your house is relying on a plumbing system 50 years old or older, it may be time to browse your local whole house repiping services.

Schedule Your Roof Insulation Service Today!

Have fun planning your home renovation! If you’re interested in improving your home’s energy efficiency with a spray foam insulation installation, the team at Foam Tech would love to help you. You can contact our Dallas office at at 214.205.1200, or you can reach our Lubbock team at 806.441.4636!

Where Can You Put a Foam Roof?



Foam Roofing Is a Great Option For Your Roof.

Foam roofing has been around for some time now. People often forget that a foam roof is even an option, but when you see all the advantages it can give you, you will see why it has been a solid choice from day one. Foam roofing can go on many different styles of roof, depending on what you are looking to get out of it. The most popular style of roof to have this on is a commercial flat roof. Before this is done though, If there has been damage like water or mold from before, you will want to call out someone for residential restoration, to make sure the area is good to go before we put down a new roof. This will give it a seamless finish and nobody will be walking across it to mess it up. Foam roofs are great at sealing out dirt and rain so that your roof will last for as long as possible.

Types Of Roof Coatings

Silicone – A single layer coating that is resistant to rain because it becomes hard when water touches it, making it a perfect choice for a flat roof.

AcrylicRoof coatings like acrylic last a very long time and are proven to be resistant to the harsh uv rays of the sun as well. яндекс

Polyurea – This roof coating will adapt to its different surroundings and make your roof resistant to water and be able to keep it safe.

When you want to get a new roof in Dallas, TX call Foam Tech at 214.205.1200.

Is Spray Foam a Good Insulator?

If you do know about spray foam, you probably only hear about it being used for roofing. But spray foam actually makes great insulation in your home’s walls and attic! When dry, the foam is completely seamless, letting no air escape. If you want spray foam insulation in Lubbock or Dallas, TX for your home’s walls or attic, call the foam experts at Foam Tech . Our Lubbock number is 806.441.4636. Our Dallas office number is 214.205.1200.

Energy Efficiency with Spray Foam

Spray Foam Insulation Is Seamless, Making It Energy Efficient

Forty percent of your home’s energy is wasted to air leaks, often in uninsulated attics. Attic temperatures vary  depending on the season and climate. Hot air rises and gets trapped in the attic, making it feel boiling as it tries to leave through the roof. The bottom of the roofing system, called the decking, gets damaged by the extreme heat and gets warped. By sealing every space where air could escape, you will help to lower your energy bills as your air conditioner won’t have to work so hard to replace the escaped air and your roof won’t get damaged from this easily fixed problem. Homeowners who have heard of spray foam insulation usually know about it being good for attics, but it can also be used for walls, as well. The original insulation rolls you see on the inside of attics and between wall frames that are made out of fiberglass and leave many gaps for air to escape. Instead, the seamless foam adheres to the frames and rafters, not allowing anything to get through. This helps traps air, allowing your HVAC unit to properly cool and heat it.

Contact Us for Foam Installation

Spray insulation is also a great moisture deterrent. Water can seep through the gaps in between the fiberglass insulation rolls, leading to mold and wood rot happening in your home. If you have a leaky roof or a pipe burst behind a wall, mold won’t grow from the water if you have spray foam insulation because it is seamless and waterproof. Made of the same foam material used on roofs that can last for decades against harsh UV rays and storms, spray foam insulation can withstand high heat, fluctuating temperatures, and leaks in your home and attic. For spray foam insulation in Lubbock or Dallas, TX, phone Foam Tech. Our Lubbock number is 806.441.4636. Our Dallas office number is 214.205.1200.

What Silicone Roof Coating Can Do For You

silicone roof coating

A Waterproof Silicone Roof Coating Can Give Your Property The Protection It Needs.

If you have noticed wear on your commercial roofing system, you are probably considering having a replacement occur. However, roof coatings are a fantastic way to renew your roofing system without having to deal with the cost of a full replacement. At Foam Tech, we highly recommend silicone roof coatings for business owners who are looking into coating options. Not only is this coating great at protecting your property from damage, it has a plethora of added benefits that can actually fortify and improve how your roof protects your business.

The Advantages of A Silicone Roof Coating

  • Seamless Defense: With any commercial roofing system, its biggest weakness lies in the seams that exist. Coatings overlay on the roofing materials, protecting your roof and reinforcing these seams against damage, wear, and water. Silicone roof coating is well known for its waterproofing capabilities as well!
  • Improved Energy Efficiency: As a reflective roof coating, silicone coated roofing can assist with more than just waterproofing. This application actually bounces UV rays away from your property, meaning that solar rays don’t affect your property. This keeps your building cooler year round, reducing energy consumption! Whether you’re new to outdoor cooking or an expert trying to perfect your craft, Pit Barrel Cooker will guarantee perfectly cooked food every time. The Pit Barrel Cooker package includes all of the accessories to cook an enormous variety (and quantity!) of food. Material: Top-quality durable 18 gauge steel with a porcelain enamel coating. Pit Barrel Cooker fits in just about any car, making it ideal for camping, tailgating, or wherever you may want to prepare amazing food. Hang brisket, brats, vegetables, ribs, and more. Then set-it & forget-it! Read Pit Barrel Cooker review at!
  • Renew Your Roofing System: Over time, all roofs start to wear and age, creating openings for further damage to your system and your commercial property. You may think your roof needs to be replaced, however, this is not the case! A silicone roof coating can be applied directly to the older materials, giving your roof renewed life, added benefits, and extending its usefulness.

Foam Tech provides you with roof coating options for your commercial property. We are always available to assist you with your next roofing project. Reach out to our team of professionals at 806-441-4636 (Lubbock), or 214-205-1200 (Dallas) to get started on your silicone roof coating!

Energy Efficiency With Spray Foam Roofing

foam roofing

Spray Foam Roofing Provides Your Commercial Property With Energy Efficiency And More.

Spray foam roofing offers commercial properties with durable roofing that lasts for many years. Our roofers apply these systems for commercial business owners because of the many benefits they provide to the properties. These systems are waterproof and can withstand damage, but did you also know they can improve your business’s energy efficiency? Having a spray foam roof can reduce the energy usage of your property and allow your utility bills to drop. This is one of the top benefits that leads commercial business owners to choose spray foam roofing.

How Spray Foam Roofing Increases Energy Efficiency

Spray foam roofing is a seamless material that is applied directly to your roof. While this prevents leaks and water damage, the fact it is seamless means it also helps your property retain the heat or cool air within. On top of this, spray foam gives your roof a reflective surface. With other roofing materials, UV rays can damage the surface and also heat up your building, making your heating and air conditioning system work harder. However, the reflectivity of spray foam bounces these UV rays away from your property, acting as a cool roofing system. This means solar rays will not affect your property as harshly. This lowers your energy usage for your commercial building as well as your utility bills.

Want more information on spray foam roofing can improve your energy efficiency? The Foam Tech roofers can answer your questions. Give us a call today at 214.205.1200 for your spray foam roofing questions in Dallas, TX.