Author Archives: Foam Tech

Where to Start When Your Home has Water Damage

Water damage can occur in a home from lots of things. An overflowing tub, a clogged toilet, a busted pipe, a DIY plumbing job gone wrong, a failing water heater… the list goes on and on! Whatever the reason, if your home has flooded and you are facing water damage, you need to act fast to begin the drying process to save as much of your property as you can and to prevent mold growth. Water gets soaked into your flooring and walls, especially into things like fabric, wood, and insulation which is where mold is most often found. If you are needing new foam insulation as a result of water damage in Lubbock and Dallas, TX, call Foam Tech at 806.441.4636 or 214.205.1200 today.

Water Damage Restoration Steps

sandbags absorbing flooded water on floor

If Your Home Has Water Damage, Your Foam Insulation Can Get Mold If Not Properly Dried Out

  • Disconnect any electrical connections and move furniture out of the way. Water and electricity don’t mix and can lead to deadly outcomes when crossed. Prevent any more damage from happening by turning off the home’s power first before you unplug any electrical appliances. You can then move all furniture out of the way. There is a slim possibility that you could save your carpet if you pull up the entire thing including the underpadding, but since the carpeting will absorb the most water, it is better to just get new flooring.
  • Get rid of water by mopping or soaking it up. More water damage is going to occur if you leave the water just sitting there and letting it soak into your flooring, walls, and fabrics. The best way to get rid of water damage from your home is to try to mop it up or soak it up by using towels and buckets. You can properly dispose of the water by dumping it down your drain or pouring it onto your lawn. Only vacuum your carpeting to steam out the water if you are positive that no electricity will touch water; otherwise shocks and fires could occur. If lower levels of your home like a basement are completely flooded, sump pumps helps to suck up and drain the water.
  • Dry out all affected areas. After all the visible water has been removed, water that has been soaked up in the walls and flooring must next be aired and dried out to prevent mold growth. To do this, ventilation and large fans are key. You can rent specialised water restoration equipment like fans and humidifiers that are stronger than their everyday counterparts and are designed specifically for removing water damage.
  • Disinfect the areas to prevent mold growth. Mold likes to grow in dark and wet places, which is why this fungi spreads so quickly around homes that have water damage. You can apply mold control products that are applied over areas that have seen water damage and basically help to form a thin layer over the fungi to not only dry it out and suffocate it, but to also crush the roots of the spores. After that you can disinfect all areas to verify that there is no more mold and to also make sure that your home is clean of any other bacteria like sewage that might of gotten mixed in with the other water damage when your home flooded.
  • Properly dispose of all water damaged items. Some of the products used cannot be thrown away in a dumpster, and also shouldn’t in order to help cut down on landfill waste. If any electronics were permanently destroyed from the water damage or you are throwing away the strong chemicals used to kill the mold, these need to be turned in to certain recycling centers to be disposed of properly and responsibly.

Can Water Damage Dry Out?

What happens when drywall gets wet? When drywall gets wet, it becomes soft. When it becomes too soft, it will crumble and rot. While drywall is very sturdy when dry, its structural integrity gets compromised and becomes severely weakened. A lot of drywall have insulation inside of them, often either spray foam insulation in TX or fiberglass. The insulation especially will absorb the moisture and result in mold growth. Water damage can dry out when proper methods are used. These include using dehumidifiers, fans, and desiccants like calcium oxide that all absorb moisture.

How Much Does it Cost For Water Damage Restoration?

If your home was severely damaged by flooding or mold, you can expect upwards of $7,500 for home water damage cleanup services. The average cost for flood restoration is around $2,700. A lot of people ask ‘will home insurance cover water damage?’ Most of the time, your insurance company will, but it is always better to be safe and get a home water damage claim just in case they decide to deny you coverage. Some insurance companies might try and blame the water damage on negligence on the homeowners’ part, by saying that the water pipes burst due to age or poor maintenance. Be prepared for these scenarios just in case they should come up. If your foam walls received water damage in Lubbock and Dallas, TX and you are needing repairs, call Foam Tech at 806.441.4636 and 214.205.1200 today.

Have a More Energy Efficient Home This Winter

Child Looks Out Onto Snow Yard

Wanting to Keep Your Family Warm and Save Energy? Here’s How to Start!

The winter season demands much of your home, which is why it’s one of the most energy intensive times of every year. According to local studies, Texans pay an average of $1500 each year on electricity. Of course, this doesn’t factor in the cost of natural gas or propane use, which only adds to total expenditures. With this sizable annual costs, it’s no wonder that Texas homeowners are constantly asking how to improve home energy efficiency.

In today’s discussion, we’ll walk through ways many properties waste money each year, examine spray foam insulation, then discover some valuable energy saving tips. Here we go!

How Can I Make My Home More Energy Efficient in the Winter?

First off, you need to identify the cost-driving factors inside your home. In other words, which appliances and home features consume the most energy? You should know that your heating and cooling systems alone represent almost 50% of your home’s energy usage. That means that any improvements the family makes for these appliances will have large financial benefits. While your central heating will obviously be handling most of the air conditioning work this season, it’s easy to enhance your HVAC system’s overall efficiency for year-long savings. We’ll discuss specifics in a little while.

Two other key aspects to your home’s energy efficiency are your water heater and lighting. These two systems are almost always running, meaning they’re constantly drawing energy. If you improve energy efficiency in these two aspects of your home, the payoff will be instantaneous and long-lasting.

How to Conserve Heat in Your Home

White Electric Space Heater

Closing Vents in Unused Rooms and Plugging in Space Heaters are Easy Ways to Save.

It goes without saying, but a damaged heating system cannot function at peak efficiency. If your home requires gas or electric heating repair, it’s worth making the call to your local HVAC specialist. Assuming your central heating system is working properly, your next step should be to complete any outstanding maintenance on the heater. That means cleaning or replacing air filters, sealing leaky ducts, and checking the thermostat for glitches.

Remember this: any aspect of your home that forces your heating to work harder will both increase your energy usage and shorten the life of your HVAC hardware.

Of course, there are other ways to save heat energy in your home. Installing improved insulation in the attic and walls can dramatically cut your annual energy costs. Spray foam wall insulation provides much better coverage than most other products on the residential market. Now many homeowners ask us, “Is foam insulation flammable?” Like other forms of insulation, foam may catch fire, so your insulation installation should include a thermal or ignition barrier.

More Energy Saving Tips

There are a variety of projects, with a wide range of investment costs, that homeowners may complete to improve energy efficiency in their home. Spray foam insulation is just one project with a high ROI, but there are many others with similar benefits. Another way homeowners can enjoy fast electricity savings is replacing any old light bulbs with newer LEDs. LED lighting is notably more efficient and can offer hundreds of dollars in savings within just a few years.

Earlier, we also briefly mentioned water heaters as being a crucial part of your home’s energy usage. While the initial investment might be higher, tankless water heaters provide significant cost savings on a daily basis. Because tank storage models must consume gas, propane, or electricity to keep the stored water hot, it’s essentially running non-stop, 24/7. Tankless water heaters, on the other hand, produce hot water on demand and so avoid this “always-on” cost.

Changing Your Family’s Usage Pattern

Evolution of Energy Efficient Lighting

Updating Your Lighting is One of the Easiest Ways to Earn Consistent Savings.

One of the greatest sources of waste in American homes comes with heating the home while no one’s there. This is often the case with two income homes, where the entire family is engaged at work or school throughout the day. By turning your system off or programming the thermostat to schedule down times during work hours, your family could realize hundreds of dollars in savings and significantly longer lifetimes for your heating and cooling appliances.

Of course, there are simple ways to improve energy efficiency without making significant changes to your home! One of the easiest ways conserve heat in your home is bundling up and turning down the central heating. You can close vents in unoccupied rooms, and even install swivel heaters in the family living room. With a little planning, you might turn the experience into a fun family movie night routine. 

Schedule Your Efficiency Assessment!

There are countless ways to improve energy efficiency in your home, but sometimes it takes a trained eye to spot areas of waste. Our team at Foam Tech specializes in foam roofing, as well as attic and wall insulation. If you’d like to learn more about foam insulation in Texas, or if you’d like to get an estimate for your home, be sure to give our Lubbock office a call at 806.441.4636. For homeowners in the Dallas / Fort Worth area, you can reach our local team at 214.205.1200!

Bang from Your Buck: Home Renovation Projects With High ROI

A Couple Sits Together Planning a Home Renovation Project

Many Projects With High ROI Focus on Efficiency and Functionality, Rather Than Style.

There are two types of home renovation projects: value-generating and money-pits. While there are countless opportunities for beautifying and enhancing your property, not all them result in you getting your money back. Whether you desire to improve your home for yourself or for future buyers, why not start with projects that will help you get the greatest bang for your buck?

General Tips for Your Renovations

When it comes to increasing the value of your property, remember that not everyone has the same awesome style tastes you have. If you’re planning on selling the property, you’ll want to make sure your decor appeals to a general audience, or at least allows them to picture their own ideal styles. That doesn’t mean you can’t have fun with your projects, just don’t turn your home into a pink Barbie Dream House.

If you’re looking for easy ROI projects, focus on those that promote better energy efficiency, functionality, and relaxation. You don’t even have to begin with large construction projects. Try starting small! You’d be amazed by the minor details that can seal the deal!

Home Improvements With the Best ROI

When people generally consider home renovations, they often think of larger projects like:

  • Garage Expansion
  • Attic Bedroom Conversion
  • Open Concept Restyling 
  • General Modernization

Can you guess which home renovation project has the highest return on investment? None of the above! Installing improved insulation in your attic and walls actually provides better value for your investment than almost any other project. While efficiency improvements generally come with an impressive return, homeowners can actually recap their entire investment (and then some) by installing high R-factor attic insulation.

Lighting has a large effect on the evaluation and feel of a house. That means picking lighter interior paint colors and potentially updating windows. If you’re looking to immediately resell, don’t dive into the highest tier of premium windows. A simple wood or vinyl material will do.

When it comes to improved functionality, there are few projects as important as updating or repairing your plumbing. Nothing kills a sale like leaky pipes or mold growth. If your house is relying on a plumbing system 50 years old or older, it may be time to browse your local whole house repiping services.

Schedule Your Roof Insulation Service Today!

Have fun planning your home renovation! If you’re interested in improving your home’s energy efficiency with a spray foam insulation installation, the team at Foam Tech would love to help you. You can contact our Dallas office at at 214.205.1200, or you can reach our Lubbock team at 806.441.4636!

Where Can You Put a Foam Roof?



Foam Roofing Is a Great Option For Your Roof.

Foam roofing has been around for some time now. People often forget that a foam roof is even an option, but when you see all the advantages it can give you, you will see why it has been a solid choice from day one. Foam roofing can go on many different styles of roof, depending on what you are looking to get out of it. The most popular style of roof to have this on is a commercial flat roof. Before this is done though, If there has been damage like water or mold from before, you will want to call out someone for residential restoration, to make sure the area is good to go before we put down a new roof. This will give it a seamless finish and nobody will be walking across it to mess it up. Foam roofs are great at sealing out dirt and rain so that your roof will last for as long as possible.

Types Of Roof Coatings

Silicone – A single layer coating that is resistant to rain because it becomes hard when water touches it, making it a perfect choice for a flat roof.

AcrylicRoof coatings like acrylic last a very long time and are proven to be resistant to the harsh uv rays of the sun as well.

Polyurea – This roof coating will adapt to its different surroundings and make your roof resistant to water and be able to keep it safe.

When you want to get a new roof in Dallas, TX call Foam Tech at 214.205.1200.

Is Spray Foam a Good Insulator?

If you do know about spray foam, you probably only hear about it being used for roofing. But spray foam actually makes great insulation in your home’s walls and attic! When dry, the foam is completely seamless, letting no air escape. If you want spray foam insulation in Lubbock or Dallas, TX for your home’s walls or attic, call the foam experts at Foam Tech . Our Lubbock number is 806.441.4636. Our Dallas office number is 214.205.1200.

Energy Efficiency with Spray Foam

Spray Foam Insulation Is Seamless, Making It Energy Efficient

Forty percent of your home’s energy is wasted to air leaks, often in uninsulated attics. Attic temperatures vary  depending on the season and climate. Hot air rises and gets trapped in the attic, making it feel boiling as it tries to leave through the roof. The bottom of the roofing system, called the decking, gets damaged by the extreme heat and gets warped. By sealing every space where air could escape, you will help to lower your energy bills as your air conditioner won’t have to work so hard to replace the escaped air and your roof won’t get damaged from this easily fixed problem. Homeowners who have heard of spray foam insulation usually know about it being good for attics, but it can also be used for walls, as well. The original insulation rolls you see on the inside of attics and between wall frames that are made out of fiberglass and leave many gaps for air to escape. Instead, the seamless foam adheres to the frames and rafters, not allowing anything to get through. This helps traps air, allowing your HVAC unit to properly cool and heat it.

Contact Us for Foam Installation

Spray insulation is also a great moisture deterrent. Water can seep through the gaps in between the fiberglass insulation rolls, leading to mold and wood rot happening in your home. If you have a leaky roof or a pipe burst behind a wall, mold won’t grow from the water if you have spray foam insulation because it is seamless and waterproof. Made of the same foam material used on roofs that can last for decades against harsh UV rays and storms, spray foam insulation can withstand high heat, fluctuating temperatures, and leaks in your home and attic. For spray foam insulation in Lubbock or Dallas, TX, phone Foam Tech. Our Lubbock number is 806.441.4636. Our Dallas office number is 214.205.1200.

What Silicone Roof Coating Can Do For You

silicone roof coating

A Waterproof Silicone Roof Coating Can Give Your Property The Protection It Needs.

If you have noticed wear on your commercial roofing system, you are probably considering having a replacement occur. However, roof coatings are a fantastic way to renew your roofing system without having to deal with the cost of a full replacement. At Foam Tech, we highly recommend silicone roof coatings for business owners who are looking into coating options. Not only is this coating great at protecting your property from damage, it has a plethora of added benefits that can actually fortify and improve how your roof protects your business.

The Advantages of A Silicone Roof Coating

  • Seamless Defense: With any commercial roofing system, its biggest weakness lies in the seams that exist. Coatings overlay on the roofing materials, protecting your roof and reinforcing these seams against damage, wear, and water. Silicone roof coating is well known for its waterproofing capabilities as well!
  • Improved Energy Efficiency: As a reflective roof coating, silicone coated roofing can assist with more than just waterproofing. This application actually bounces UV rays away from your property, meaning that solar rays don’t affect your property. This keeps your building cooler year round, reducing energy consumption!
  • Renew Your Roofing System: Over time, all roofs start to wear and age, creating openings for further damage to your system and your commercial property. You may think your roof needs to be replaced, however, this is not the case! A silicone roof coating can be applied directly to the older materials, giving your roof renewed life, added benefits, and extending its usefulness.

Foam Tech provides you with roof coating options for your commercial property. We are always available to assist you with your next roofing project. Reach out to our team of professionals at 806-441-4636 (Lubbock), or 214-205-1200 (Dallas) to get started on your silicone roof coating!

Energy Efficiency With Spray Foam Roofing

foam roofing

Spray Foam Roofing Provides Your Commercial Property With Energy Efficiency And More.

Spray foam roofing offers commercial properties with durable roofing that lasts for many years. Our roofers apply these systems for commercial business owners because of the many benefits they provide to the properties. These systems are waterproof and can withstand damage, but did you also know they can improve your business’s energy efficiency? Having a spray foam roof can reduce the energy usage of your property and allow your utility bills to drop. This is one of the top benefits that leads commercial business owners to choose spray foam roofing.

How Spray Foam Roofing Increases Energy Efficiency

Spray foam roofing is a seamless material that is applied directly to your roof. While this prevents leaks and water damage, the fact it is seamless means it also helps your property retain the heat or cool air within. On top of this, spray foam gives your roof a reflective surface. With other roofing materials, UV rays can damage the surface and also heat up your building, making your heating and air conditioning system work harder. However, the reflectivity of spray foam bounces these UV rays away from your property, acting as a cool roofing system. This means solar rays will not affect your property as harshly. This lowers your energy usage for your commercial building as well as your utility bills.

Want more information on spray foam roofing can improve your energy efficiency? The Foam Tech roofers can answer your questions. Give us a call today at 214.205.1200 for your spray foam roofing questions in Dallas, TX.

Roof Coatings: Why You Need One


A roof coating is something that so many people don’t think about when they are getting their industrial and commercial roofs done. This is crazy because the coatings for your roof are exactly what you should be thinking about until you have one. These coatings can add 10 or more years onto the life of your roof. They can also protect it very well. When you have a flat roof, it needs extra protection because if things like rain fall on it, it has no way to slide off. When you have your roof coated, it give it an extra shield of protection on top of the roof so that it won’t give you any problems. All coatings do something slightly different and it is up to you what you would like to do.


Spray Foam Option

Spray Foam Roofing – This is a great option and one that we specialize in as well. This is a spray on roofing material that will keep your flat roof protected and covered. It is also easy to repair. The whole roof does not have to be replaced if there is a problem, it just has to be resprayed in that area.

When you need a roof coating that provides the best protection for your roof, call Foam Tech at 214.205.1200 and we can help you find the perfect fit for you. Not only that, but we can go over pricing and any other concerns you might have.

How To Keep Your Spray Foam Roof At Its Best

A spray foam roof gives many benefits to buildings including leak protection, energy efficiency, and long-lasting roofing. When you have a spray foam roof, you expect it to last for a long, long time. However, without proper care and effort, your system can wear and break down. How can you help your spray foam roof stay at its best? There are a couple of services you can look for to ensure your system stays ready for anything.

Service For Your Spray Foam Roof

Annual Inspection

Foam Tech Spray Foam Roof

Spray Foam Roofing Lasts A Long Time With The Proper Care.

You may have heard it often, but having regular inspection can really make the difference in a long-lived roofing system. Spray foam roofs should have a scheduled annual inspection by reliable roofers. During an inspection, your roofer can ensure that your system hasn’t been damaged and ensure that it is ready for anything that is thrown its way. If you are in an area with storms, it may be a good idea to have an additional inspection once the weather is clear.

Easy Repairs

A spray foam roof gives your building quality protection and efficiency, however, it can be subject to punctures, holes, cracks, and other minor damage. These can be caused by storms and high winds, leaving your building open to leaks, water, and further damage. A roofing company can repair these and restore your buildings protection. Once the storm passes, contact your local roofer for repair. 

Foam Tech is proud to provide quality spray foam roof installation for Dallas and Lubbock, TX and many other locations throughout the states of Texas and New Mexico. Give us a call today at 806-441-4636 (Lubbock), or 214-205-1200 (Dallas) for spray foam roof service.

Why Choose An Acrylic Roof Coating?

Roof coatings can be a great addition to your roof. They can add year and years onto the life of an already great roofing system. There are many types to choose from and it can get a little overwhelming with all the choices out there. We are here to help you make the right decision for your roof, but we want to tell you why an acrylic roof coating would be the best option for you.

3 Reasons to Choose Acrylic

No Hassle – This roof coating is easy because it doesn’t require any stripping of any roofing materials. It can be applied right to the top of your roof and that is it. This makes it cheaper for you because it is less work and less disposable materials to get rid of. This also makes it better for the environment because you are not wasting any materials. It is simply applied to the top of the roof with ease.

Longevity – We mentioned above that a roof coating can make your roof last years longer than it would without it. This coating can add an extra 20 years to the life of your roof. This kind of protection is some of the best you can find.

Material – Because this coating is bright white in color, it reflects sunlight right off the top, helping with your energy bill. It is also dirt resistant, which is useful because over the years, dirt can build up on your roof and cause damage, but not on this material.

An acrylic roof coating is a great way to keep your roof protected and lasting as long as possible. Call Foam Tech, serving in Lubbock and Dallas, TX. Just call our Lubbock location at 806-441-4636 and our Dallas location at 214-205-1200.